Steel cover plate
Each chimney regardless of the way of its finishing (plastered, tiled, covered with Struktonit (fibre-cement tiles), or faced with clinker bricks) must necessarily be covered with a plate from the top.
Our ready-made steel cover plates are characterized by the following features:
1. They protect the chimney against atmospheric precipitation.
It is extremely important as thanks to this water does not flow into the space between the hollow block and the ceramic insert causing a very unpleasant in consequences stains on the chimney. In addition, the insulation wool exposed to rainwater loses its insulating properties. The cover also protects the chimney from the possibility of water penetration between the block and the tile or clinker brick causing chipping or stains.
2. Durable – made of durable galvanized steel sheet of the thickness of 1 mm, additionally powder coated.
3. Esthetical – painted in any RAL colour.
4. Lightweight – no need to make and bring on the roof unusually heavy concrete slabs.
5. Easy to install – mounting the plate is no longer than one minute.
a) Drill holes in marked places.
b) Place the plate and mark holes on the block.
c) Drill holes in the block.
d) Insert expansion anchors.
e) Bolt the plate.
6. It eliminates the need to concrete the cover plate on the chimney. The practice of concreting a plate on the chimney often leads to filling the ventilating channels inside the flue block, thus leading to connecting the ceramic inserts to the chimney housing. Such situations lead to damages to the ceramic pipes.
Possible for the implementation regardless of the size and complexity of the chimney.
8. Perfectly matched – in terms of the hole diameter.
The hole in the plate fits perfectly to the diameter of the sealing flange, which in combination with sealing putty supplied by us in the installation kit, creates excellent protection against even the driving rain.
9. Available in our warehouse in variants of "S" and "SW" in brick red RAL 3009. Others available on request with the manufacturing period of up to two weeks.
10. The kit includes: